Bio-rad ChromLab™ Software User Manual download pdf (Page 124)

5 | Plumbing and Priming the NGC Chromatography Systems

122 | NGC Chromatography Systems and ChromLab Software

b. (Optional) Do one of the following:

 Connect Tube #4 from port 1 to the Common inlet port on the BioFrac

fraction collector diverter valve.

 Connect Waste tubing to port 1 and immerse in a waste container.

c. Connect outlet tubing to the remaining ports as needed.

2. If your system has two outlet valves:

a. Connect tubing from the Out port on the conductivity monitor or pH

monitor to the In port on outlet valve 1 (O1).

b. (Optional) Do one of the following:

 Connect Tube #4 from port 1 on O1 to the Common inlet port on the

BioFrac fraction collector diverter valve.

 Connect Waste tubing to port 1 on O1 and immerse in a waste

container.

c. Connect tubing from port 12 on O1 to the In port on outlet valve 2 (O2).

d. Connect outlet tubing to all remaining outlet ports as needed.

3. Immerse the outlet tubing in fraction collection containers.

1 2 ... 119 120 121 122 123 124 125 126 127 128 129 ... 177 178

No comments

Bio-rad ChromLab™ Software User Manual Page 124